RKI Instruments - Gas Detection for Life
	Eagle 2 - 1-6 Gas Sample Drawing Monitor RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors. The EAGLE 2 now includes PID (Photo Ionization Detector) capability. Conversion factors for a variety of common gases are programmed into the EAGLE 2 for both the PID sensor and LEL/PPM catalytic sensor. Made in U.S.A. Features: TEST Monitor up to 6 different autoranging gases; PPM / LEL hydrocarbon detection; PID (Photo Ionization Detector) low and high range for VOC detection; Infrared Sensors available for CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC; TC (Thermal Conductivity) sensor available for % Vol. H2 or % Vol. CH4 Plug and play, smart toxic sensors; Hundreds of configurations; Displays in 5 languages; Powerful long-life pump up to 125’ range; Low flow pump shut off and alarm; Methane elimination for environmental use; Alkaline 16 hours or Ni-MH 20 hours capability; Password protection; Datalogging standard; IrDA communications port; Autocalibration; Internal hydrophobic dust filter; External probe with hydrophobic filter; Ergonomic RFI / EMI / chemical / weather resistant enclosure; Intrinsically safe design, CSA approval. More Information. Comparison vs. Eagle.
	Gas Tracer - Confined Space - Leak Detector Built around high-quality micro-sensor technology, the Gas Tracer is RKI’s smallest personal 5 sensor monitor with a built in sample pump. Weighing only 12.3 ounces, it has many features which set the Gas Tracer apart from the competition. For example, it can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability. The Gas Tracer is excellent for gas line purge testing and detection of small gas leaks.
	Highly Sensitive Colorimetric Tape Gas Monitors RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels of a wide variety of gases. Each model is equipped with easily replaceable tapes that are specific to the gas being monitored. Each model is equipped with a digital display showing the type of gas and concentration in either PPM or PPB. Each model also displays remaining tape time as well as an end of tape alarm. PPB detection for many gases PPB or PPM display digital Easily transportable 115 VAC powered  More Information.
	FP-250A - Toxic Gas Monitor - Interference-free gas detection. Easy to check the detection function and alarm operation with check card. The FP-250A is a highly sensitive toxic gas monitor using a gas detection cassette tape which is almost free of interference from other gases. As the detection tape responds by a chemical reaction with the gas being measured, there is no interference from hydrogen or organic gases. Its best application then is in monitoring of the target gas at the outlet of an absorption scrubber, as well as in monitoring of the work environment for personnel safety. Since the cassette can be replaced so quickly and easily, detection of multiple gases is practical. Features: Interference-free detection (PPB or PPM digital display); Detection of low gas concentrations (TLV level); Easy to replace cassette tape (cassette remainder display included); Easy to change to other gases by replacing the gas card; Provision for connection to personal computer (RS-232C interface: Optional); Easy to check the detection function and alarm operation with check card; Desktop size promotes easy transportability. Download brochure. Applications:  Environmental Monitoring, Semiconductor Fabs, Manufacturing, Detecting uncaptured gas from scrubber.
	FP250-FL - High Sensitivity Formaldehyde Gas Monitor Formaldehyde is a carcinogenic chemical that is used in glues, deodaorants, and many products where quick drying properties are required. It is also used in hospitals as a preserving agent. The World Health Organization has set a standard of 0.08ppm average exposure for 20 minutes, and the American ACGIH has set a ceiling exposure value of 0.3 ppm. Formaldehyde affects residents of new homes or offices, and is considered as one cause of "Sick Building Syndrome" (When residents in buildings feel dizzy or nauseous. Sometimes it can also cause skin rash, cough, and liver or kidney damage). Download brochure. Applications: Indoor Air Quality monitoring in homes and buildings; Room environment monitoring in hostitals and museums; Environmental monitoring in particle board and building material plants; Environmental monitoring of chemical and manufacturing plants using formaldehyde; Environmental monitoring of furniture manufactureres or storage.
	FP-260AGZS - High Sensitivity Toxic Gas Monitor for Octafluorocyclopentene, Perfluorobutadiene, or Hexafluoropropylene This model is a highly sensitive C5F8 / C4F6 / or C3F6 gas monitor which uses a special techniquie for detecting C5F8, C4F6 or C3F6. into more readily detectable compounds. Then, the resulting compounds cause a chemical reaction on a colorimetric tape, and the intensity of the chemical reaction is analyzed and correlated to a specific ppm level of C5F8, C4F6 or C3F6 present in the sample. The detection tape is in a handy cassette which is easily removed for periodic replacement. Download brochure. Features: Ideal for monitoring semiconductor fab clean rooms; Ideal for low gas concentration; Minimal interference from solvents such as Fluorinert and Galden; Easily replaceable plug-in tape cassette; Cassette tape remainder display included Applications: Environmental Monitoring; Semiconductor Fabs; Manufacturing; Detecting uncaptured gas from scrubber
	FP-260 - High Sensitivity Toxic Gas Monitor for Phosphine, Silane, Diborane, Arsine, Disilane, Hydrogen Sulfide, Phosgene, Chlorine, and Hydrogen Selenide The FP-260 is a highly sensitive toxic gas monitor using a gas detection cassette tape which is almost free of interference from other gases. Since the detection tape responds only to the chemical reaction of the gas being measured, there is no interference from hydrogen or organic gases. Its best application then is in monitoirng of the target gas at the outlet of an absorption scrubber, as well as in monitoring of the work environment for personnel safety. Since the cassette can be replaced so quickly and easily by a one touch cassette method, detection of multiple gases is practical. Download brochure. Features: Ideal for monitoring clean room in the semiconductor industry; Ideal for low gas concentration (ppb detection); Interference-free detection; Easily replaceable plug-in tape cassette; Cassette tape remainder display included Applications: Environmental Monitoring; Semiconductor Industry; Manufacturing
	FP-300 - High Sensitivity Toxic Gas Monitor RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels Ammonia, Arsine, Chlorine, Diborane, Hydrogen Chloride, Hydrogen Fluoride, Hydrogen Sulfide, Phosphine, Silane. The FP-300 is equipped with an easily replaceable tape. This model is equipped with a digital display showing the type of gas and concentration in PPM or PPB. The FP-300 will also display remaining tape life as well as an end of tape alarm. The FP-300 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “tape saver mode” extends tape life in applications where high background gas levels may be present. The FP-300 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments. Download brochure. Features: Small and compact; Highly sensitive and ideal for low gas concentrations (ppb detection); Interference-free detection; Easy detection tape replacement with plug-in cassette; Tape remainder display and tape end warning alarm provided; Easily transportable Applications: Environmental Monitoring; Semiconductor Fabs; Manufacturing; Detecting uncaptured gas from scrubber
	FP-301FL - High Sensitivity Formaldehyde Gas Monitor RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels of a wide variety of gases. The FP-301FL is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-301FL will also display remaining tape life as well as an end of tape alarm. The FP-301FL has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “tape saver mode” extends tape life in applications where high background gas levels may be present. The FP-301FL meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments. Download brochure. Features: Small and compact; Highly sensitive and ideal for low level formaldehyde concentrations; Interference-free detection; Easy detection tape replacement with plug-in cassette; Tape remainder display and tape end warning alarm provided; PPM digital display; Easily transportable; 115 VAC powered; Alarm relays; 4-20mA output Applications: Furniture and woodworking; Coating and varnishing; Engineered wood products; Medical / veterinary; Painting & corrosion resistant finishes; Carpet manufacture & storage; Adhesives; Heat treatment operations; Manufactured homes/trailer/RV inspection
	FP-330 - High Sensitivity Formaldehyde Gas Monitor RKI’s paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free gas detection. The FP-330 is equipped with an easily replaceable tape that is highly specific to Formaldehyde. This model is equipped with a digital display showing the type of gas and concentration in PPM. The FP-330 will also display remaining tape life as well as an end of tape alarm. The FP-330 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique “Tape Saver mode" extends tape life in applications where high background gas levels may be present. The FP-330 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments. Download brochure. Features: Small and compact; Highly sensitive and ideal for low level formaldehyde concentrations; Interference-free detection; Easy detection tape replacement with plug-in cassette; Tape remainder display and tape end warning alarm provided; PPM digital display; Easily transportable; 115 VAC powered; Alarm relays; 4-20mA output Applications: Furniture and woodworking; Coating and varnishing; Engineered wood products; Medical / veterinary; Painting & corrosion resistant finishes; Carpet manufacture & storage; Adhesives; Heat treatment operations; Manufactured homes/trailer/RV inspection.

Home